Hardware
Last updated
Last updated
FMADIO 100G Hardware looks as follows
List of known and tested transcivers that work with the system. Other transciver types should be ok, please check with support@fmad.io for clarification.
FMADIO Packet Capture systems are Transceiver Vendor neutral, 3rd party optics are fully supported.
Module
Speed
Connector
Cable Type
Brand
100G SR4
100Gbps
MPO12
OM4 MMF
Generic
100G LR4
100Gbps
LC
OS2 SMF
Generic
Finisar FTLC1154RDPL
100G CWDM4
100Gbps
LC
OS2 SMF
Generic
Finisar CTLC1157RGPL
100G SWDM4
100Gbps
LC
OM4 MMF
Generic
Finisar FTLC9152RGPL
100G CR4
100Gbps
DAC
Passive Twinax
Generic
40G SR4
40Gbps
MPO12
OM4 MMF
Generic
Finisar FTL410QE4C
40G LR4
40Gbps
LC
OS2 SMF
Generic
40G CR4
40Gbps
DAC
Passive Twinax
Generic
Installation of the rails is tool less please see the following instructions
System is installed with dual 1200W power supply. By default the system is configured as follows
Total Power Consumption
Behavior
LED
< 400W
HOT-STANDBY
Only Primary PSU is active, Secondary PSU in standby mode
Primary, Solid Green
Secondary, Green Blink
> 400W
HOT-HOT
Both Primary and Secondary PSU are in active mode
Both Solid Green
The above behavior can be overridden to always be in HOT-HOT load balancing mode, with a configuration setting. Please contact support@fmad.io for more information
438 x 43.5 x 730mm
17.2" x 1.7" x 28.7"
(Designed for EIA 19” rack)
26KG / 57 lbs
Silver metallic
2 x Redundant Hot swappable 1200W
110-240AC, 12-7A, 50-60Hz
8 x 40x40x56mm (23,000rpm) Chassis
2 x 1 x 40x40x56mm (Power Supply)
Front to back
Operating temperature: 10°C to 28°C
Operating humidity: 8-80% (non-condensing)
10 x U.2 NVMe Front panel drives
1 x IPMI BMC out of band management (RJ45)
2 x RJ45 Management ports
2 x SFP+(or QSFP+) High speed management ports
2 x QSFP28 Capture ports
1 x Serial port (RJ45 connector)
Dual socket Intel Xeon Platform
DDR4 RDIMM RAM
