Network Port Layout

FMADIO40G Gen3 1U (10G management)

FMADIO40G Gen3 1U Port Layout

FMADIO40G Gen3 2U (10G management)

FMADIO40G Gen3 2U Port Layout

Port Mapping

1Gbe Management Ports

The default 1G management port is labeled "L1" and closets to the power supply.

This L1 port can bridge the IPMI/BMC port (single RJ45 connection for both Server and BMC)

The L2 port can not bridge the IPMI/BMC port

IPMI Port

The IPMI Port is a dedicated segmented network port used for out of band communication with the system. It allows power on/off and KVM capabilities. Highly recommend connecting this. Default IP address is 192.168.0.93/24

Management Port

The Management ports are 1G SFP/ 10G SFP+ (Capture System). Or 10G/40G QSFP+ (Analytics systems) These can be run in standard, or link bonded / redundant setup.

FMADIO40Gv3 Capture systems,

Port Count	Port Speed	Interface
2	10G	SFP+
2	1G	SFP

FMADIO40Gv3 Gen3 Analytics Systems

Port Count	Port Speed	Interface
2	40Gbps	QSFP+
4	10Gbps	QSFP+ Breakout Cables

Capture Port

Capture ports can be configured in the following way.

Port Count	Port Speed	Interface
2	100Gbps	QSFP28 (FEC or no FEC)
2	40Gbps	QSFP+
8	25Gbps	QSFP28 (Not released yet)
8	10Gbps	QSFP+ Breakout Cables

PPS Connector

The PPS connector is a 1 Pulse Per Second time synchronization cable. It runs on a 3.3V trigger signal the interface is SMA Coaxial cable

Linux Port mapping