Network Port Layout
FMADIO40G Gen3 1U (10G management)
FMADIO40G Gen3 2U (10G management)
Port Mapping
1Gbe Management Ports
The default 1G management port is labeled "L1" and closets to the power supply.
This L1 port can bridge the IPMI/BMC port (single RJ45 connection for both Server and BMC)
The L2 port can not bridge the IPMI/BMC port
IPMI Port
The IPMI Port is a dedicated segmented network port used for out of band communication with the system. It allows power on/off and KVM capabilities. Highly recommend connecting this. Default IP address is 192.168.0.93/24
Management Port
The Management ports are 1G SFP/ 10G SFP+ (Capture System). Or 10G/40G QSFP+ (Analytics systems) These can be run in standard, or link bonded / redundant setup.
FMADIO40Gv3 Capture systems,
Port Count | Port Speed | Interface |
2 | 10G | SFP+ |
2 | 1G | SFP |
FMADIO40Gv3 Gen3 Analytics Systems
Port Count | Port Speed | Interface |
2 | 40Gbps | QSFP+ |
4 | 10Gbps | QSFP+ Breakout Cables |
Capture Port
Capture ports can be configured in the following way.
Port Count | Port Speed | Interface |
2 | 100Gbps | QSFP28 (FEC or no FEC) |
2 | 40Gbps | QSFP+ |
8 | 25Gbps | QSFP28 (Not released yet) |
8 | 10Gbps | QSFP+ Breakout Cables |
PPS Connector
The PPS connector is a 1 Pulse Per Second time synchronization cable. It runs on a 3.3V trigger signal the interface is SMA Coaxial cable
Linux Port mapping
Last updated
