FMADIO 20G Gen2 System

System is End of Sale.

End of Life 2026

FMADIO20G Gen2 Systems

Network port configuration can be achieved using a) the web interface, b) SSH command line interface(CLI). Using the Web interface is the easiest route, however in highly constrained network environments a pure CLI based configuration can be easier

WEB INTERFACE: NETWORK CONFIG

From the dashboard page, Start by selecting the configuration menu option from as shown below (highlighted in green).

Then edit the network configuration`s IP/Netmask/Gateway/DNS setting as shown in the image below. After each field has been edited the system automatically saves and updates the system setting (save button is not required). After completing the update, refresh the web page to confirm the new settings.

Select the tools menu from the top toolbar, as shown in the image below.

And finally select the Power Cycle / Reboot button to restart the system

added some random comments

Modifying the network configuration setting in a restricted Colocation environment can be far easier to achieve via the command line. The first step is SSH into the system, change to the specified directory and view the current network settings, as shown below

aaron@display0:/tmp$ ssh fmadio@192.168.11.75
fmadio@192.168.11.75's password:
  _____                    .___.__      10G
_/ ____\_____  _____     __| _/|__|  ____
\   __\/     \ \__  \   / __ | |  | /  _ \
 |  | |  Y Y  \ / __ \_/ /_/ | |  |(  <_> )
 |__| |__|_|  /(____  /\____ | |__| \____/
            \/      \/      \/
============================================
  -+ no user serviceable parts inside +-
fmadio@fmadio10-049:~$ cd /mnt/store0/etc
fmadio@fmadio10-049:/mnt/store0/etc$ cat network.lua
-- auto generated on Tue Apr 14 10:38:13 2015
local Config =
{
["sf0"] =
{
    ["Mode"]    = "disabled",
    ["Address"] = "192.168.1.2",
    ["Netmask"] = "255.255.255.0",
    ["Gateway"] = "192.168.1.1",
    ["DNS"]     = "192.168.1.1",
},
["sf1"] =
{
    ["Mode"]    = "static",
    ["Address"] = "192.168.12.10",
    ["Netmask"] = "255.255.255.0",
    ["Gateway"] = "192.168.12.1",
    ["DNS"]     = "192.168.12.1",
},
["eth0"] =
{
    ["Mode"]    = "static",
    ["Address"] = "192.168.11.75",
    ["Netmask"] = "255.255.255.0",
    ["Gateway"] = "192.168.11.1",
    ["DNS"]     = "192.168.11.1",
},
["bmc"] =
{
    ["Mode"]    = "static",
    ["Address"] = "192.168.11.73",
    ["Netmask"] = "255.255.255.255",
    ["Gateway"] = "192.168.11.1",
    ["DNS"]     = "192.168.11.1",
},
}
return Config

In the example configuration file above, the network ports are mapped as follows

Layout of the network ports is as follows. for FMADIO100G v2 1U Capture System (10G SFP+ management)

1Gbe Management Ports

The Lower RJ45 is the default management port

IPMI Port

The IPMI Port is used for out of band communication with the system. It allows power on/off and KVM capabilities. Highly recommend connecting this. Default IP address is 192.168.0.93/24

Management Port

10G Management Ports use SFP+ Interfaces

Capture Port

Capture ports can be configured in the following way

PPS Connector

The PPS connector is a 1 Pulse Per Second time synchronization cable. It runs on a 3.3V trigger signal the interface is SMA Coaxial cable