Network Port Layout
Last updated
Last updated
Layout of the network ports is as follows. for FMADIO100G v2 1U Capture System (10G SFP+ management)
1Gbe Management Ports
The Lower RJ45 is the default management port
IPMI Port
The IPMI Port is used for out of band communication with the system. It allows power on/off and KVM capabilities. Highly recommend connecting this. Default IP address is 192.168.0.93/24
Management Port
10G Management Ports use SFP+ Interfaces
Capture Port
Capture ports can be configured in the following way
Port Count | Port Speed | Interface |
2 | 10Gbps | SFP+ Transceiver |
2 | 1G | SFP Transceiver |
PPS Connector
The PPS connector is a 1 Pulse Per Second time synchronization cable. It runs on a 3.3V trigger signal the interface is SMA Coaxial cable
