SSD Hardware replacement
Last updated
Was this helpful?
Last updated
Was this helpful?
Replacement of SSDs is straight forward but requires unracking and removing PCIe devices
Once unracked remove the top cover by un-screwing the system as follows
Once removed the system looks like the following. The SSDs are located at the following location, shown in RED with the GIGABYTE thermal heatsink
To remove the M.2 SSD drives remove the screwes shown as follows
The PCIe riser is detached from the motherboard
SSD PCIe card is removed from the Riser
SSD PCIe black heatsink is removed from the board
After the PCIe card has been removed, the SSDs are accessible as follows
Remove the screws highlighted in RED above to remove and replace the SSDs
After completing the SSD replacement, reverse the above steps to complete the installation
